Drip Kit

0

Posted by admin | Posted in Hydroponics & Seed Starting | Posted on 16-09-2009

Drip Kit

Watering the Greenhouse

Watering is one of the most tedious tasks with greenhouse gardening, as these types of indoor gardens require much more water. Watering your greenhouse improperly could cause you to lose your crops. This article will help you to learn ways to make your daily chore much easier while fabulously reaping the benefits.

When To Water

It's always best to water your plants in the evening, rather than during the hot daytime hours.

Plants made up of soil-less composts, need more water because they get dry more quickly.

The best way to kill your plants is to water them simply out of routine of doing it. Make sure not to over-water them, but at the same time, assure that they have the amount of moisture that they need.

Larger and more mature plants need more water than young new plants. Take care to take the proper measures to water them accordingly. When your older plants start drooping, it may be time to take out the watering can!

The plants in your greenhouse will require less water during the dormant season of the coldest weather usually in December and January.

Keeping the floor wet in your greenhouse in the very hot summer days, will help to keep moisture in the air for your crops.

Hand-Watering

At times it may be hard to predict the amount of moisture that is in a plant pot, especially if it has a lot of peat-based compost. Try pressing your fingers gently into the top of the soil mixture inside of the pot.

Another way to guess the level of moisture is to use moisture indicators in a few select pots.

Larger plants that have been established for some time will benefit most with less forceful watering. This can be accomplished by breaking the force of the water dispersing from the watering can. Sometimes a small piece of cloth will do the trick. Small seeds definitely need to be watered with a very gentle spray. This can be done by pointing the rose of the watering can in an upward motion.

Hand-watering is still the most dominant method of greenhouse garden irrigation, even in today's competitive markets. After frequent crop losses however, many growers are realizing that it may be time to change their traditional ways.

Overhead Spraying

Many of us prefer to have a spray mechanism when watering the greenhouse garden. It is possible to purchase several different designs of tubing that can be suspended overhead from the roof of your greenhouse. Some water spraying systems will spray in two-sided directions; others will spray water to only one side. You will have to select the type of tube design that you need and prefer.

Improvising

Although it is possible to buy specially designed systems with reservoirs, you can improvise to save money. This way works wonderfully. Find a lengthy piece of plastic gutter and use it as a reservoir by inserting one end of the capillary mat. Capillary mats allow the plants to be watered from the base of the container, where the capillary action of the compost takes place. Just sit your plants on top of the mat. The gutter should be always filled with water. You can do this by hand-watering it or by creating a drip system with the simple use of water bags.

Simple drip water system kits can be purchased with minimal cost for those that would prefer this method. These kits include usually about six drip valves that can be synchronized. Some kits even have adjustable water and fertilizer flow.

You can also pick up a combination of mist-like sprayers and adjustable dripper kits.

It is often best to have automatic watering systems that can do the job when the owner or part-time hobbyist is away at work or away even for short periods of time. Timers or automatic sensors can be applied to help as well with this task.

Allow me to share this quotation:

The most noteworthy thing about gardeners is that they are always optimistic, always enterprising, and never satisfied. They always look forward to doing something better than they have ever done before. Vita Sackville-West

For more great gardening tips and gardening free stuff, please visit http://www.ez-gardening-tips.com

Free to Publish, but may not be edited in any way and resource link must remain.

Can you just buy shower knobs instead of the entire kit?

I was trying to tighten up my hot water knob in my shower (I have a hot water knob, a knob to turn on the shower, and a cold water knob) and I think I broke it. I can't stop the drip that I was trying to stop and I can't turn the hot water on. The knob just spins around when I try to turn it, and little bits of metal dust I guess came out, like I wore off the treads of the screw or something. Is there a way to just replace the hot water knob or do I have to go buy an entire kit (from looking online they seem to be sold with all 3 knobs and then a tub faucet)? Please only answer if you know. Thanks. Oh, and if you can buy them individually, some examples of stores to try or links to their sites would be greatly appreciated. Thanks.

This sounds like a Price Piaster fixture. You have a hot cold and a diverter valve. The little chrome buttons in the center of the knob pry off then you will find a screw that holds the knob in place.After you remove the knobs you can unscrew the chrome trim rings off the stem. After you remove the trim pieces you can remove the stem . This requires a special tool that can be purchased at your local hardware store. When you remove the stems be sure and take it with you so it can be matched. The seats are probably OK but if not they can be replaced as well. Again this requires a special tool .
This sounds difficult but it is not. cheaper than replacing the fixture .Before you start turn the water off to your house and drain the pipes by opening a cold valve in the sink. Most DIY stores carry these parts you can buy a knob or the stems.
Good luck